Payment & Shipping Terms:
|Color:||Customer Requested||Voltage:||Customer Requested|
automatic water bottling making machine for plastic bottles
|What is technical parameter of our automatic pet bottles making machine?|
Plastic bottle Blowing Machine is a high speed linear blow molding machine which is developed and manufactured by our Company using the most advanced bottle blowing technology in the world. Owing to the machine's high degree of automation, high production efficiency,high safety, high stability and reliability, the products made will not be contaminated in any intermediate steps, and it can be matched up directly with the production line of filling and can be widely used in production of mineral water, carbonic acid beverage, juice, tea and heat-resistence bottle produc.
|CONTAINER||Number of cavity||2 cavities||3 cavities||4 cavities||6 cavities||2 cavities||3 cavities|
|Theoretical output||2600-3200 pcs/hr||3200-3800 pcs/hr||5500-6000 pcs/hr||7000-8000 pcs/hr||2300-2600 pcs/hr||2800-3200 pcs/hr|
|Number of lamp||21pcs||28pcs||35pcs||56pcs||27pcs||36pcs|
|Actual power consumption||14kw||18kw||22kw||24kw||18kw||22kw|
|AIR SYSTEM||Operatating pressure||7-9kg/cm²||7-9kg/cm²||7-9kg/cm²||7-8kg/cm²||7-9kg/cm²||7-9kg/c m²|
|Low pressure consuming||1000Ltr/min||1200Ltr/min||1600Ltr/min||1600Ltr/min||1200Ltr/min||1400Ltr/min|
|Blowing pressure||25-35kg/c m²||25-35kg/c m²||25-35kg/c m²||25-35kg/c m²||25-35kg/c m²||25-35kg/c m²|
|High pressure consuming||1500-2000 Ltr/min||2000-2200 Ltr/min||2200-2500 Ltr/min||2000-2200 Ltr/min||2000-2500 Ltr/min||2000-3000 Ltr/min|
|Operating pressure||5-6 kg/cm²||5-6 kg/cm²||5-6 kg/cm²||5-6 kg/cm²||5-6 kg/cm²||5-6 kg/cm²|
|What is the feature for our automatic pet bottles making machine?|
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mold.
9. Two ways of operating: automatic and manual.
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting
15. Low rejection rate: less than 0.2 percent.
|What is the parts of our automatic pet bottles making machine?|
1) PLC colour display: MITSUBISHI(JAPAN)
2) Pneumatic parts:FESTO(GERMANY)
3) Controller of preform transfer:Servo motor National(JAPAN)
4) Value: FESTO (Germany)
5) Other electric parts are all world-famous brand